| |
|
Sunday, 07 January 2018 |
Specifications
Dell™ OptiPlex™ GX280 Mini-Tower Computer Systems User's Guide
|
Microprocessor |
| Microprocessor type |
Intel® Pentium®
4 - 2.8 GHz; design provides for future Dell-supported upgrades.
|
| Level 1 (L1) cache |
32 KB |
| Level 2 (L2) cache |
1 MB pipelined-burst,
eight-way set associative, write-back SRAM |
|
Memory |
| Type |
400 & 533 MHz DDR2
SDRAM |
| Memory connectors |
4 |
| Memory capacities |
1 GB non-ECC |
| Minimum memory |
dual-channel: 256 MB
single-channel: 128 MB |
| Maximum memory |
4 GB |
| BIOS address |
F0000h |
|
Computer Information |
| Chipset |
Intel Grantsdale |
| Data bus width |
64 bits |
| Address bus width |
32 bits |
| DMA channels |
eight |
| Interrupt levels |
24 |
| BIOS chip (NVRAM) |
4-Mb |
| Memory speed |
400 & 533 MHz |
| NIC |
Integrated network
interface with ASF 1.03 support as defined by DMTF. Capable of
10/100/1000 communication:
- Green — A good connection exists between a 10-Mbps
network and the computer.
- Orange — A good connection exists between a 100-Mbps
network and the computer.
- Yellow — A good connection exists between a 1 Gb (or
1000-Mbps) network and the computer.
- Off — The computer is not detecting a physical
connection to the network.
|
|
Video |
| Type |
Integrated Intel
Extreme Graphics |
|
Audio |
| Type |
AC97, Sound Blaster
emulation |
| Stereo conversion |
16-bit
analog-to-digital; 20-bit digital-to-analog |
|
Controllers |
| Drives |
Two serial ATA
controllers supporting one device each and one parallel Ultra
ATA/100 IDE supporting two devices per channel with one channel |
|
Expansion Bus |
| Bus type |
PCI 2.2
SATA 1.0a
USB 2.0
PCI Express 1.0a |
| Bus speed |
PCI: 33 MHz
SATA: 1.5 Gbps
USB: 480 Mbps
PCI Express x1: 5 Gbps
PCI Express x16: 80 Gbps |
| Mini-Tower |
full-height cards
supported |
|
PCI |
|
|
connectors |
two |
|
connector size |
120 pins |
|
connector data width (maximum) |
32 bits |
|
PCI Express |
|
|
connectors |
one x1 and one x16 |
|
connector size |
36 pins (x1) and 120
pins (x16) |
|
connector date width (maximum) |
one PCI Express lane
(x1) and 16 PCI Express lanes (x16) |
|
Drives |
|
Externally accessible: |
one 3.5-inch drive bay
two 5.25-inch drive bays |
|
Internally accessible: |
two bays for 1-inch
high hard drives |
|
Connectors |
|
External connectors: |
|
Serial |
9-pin connector;
16550C-compatible |
|
Parallel |
25-hole connector
(bidirectional) |
|
Video |
15-hole connector |
|
Network adapter |
RJ45 connector |
|
Optional PS/2 with secondary serial port
adapter |
Two 6-pin mini-DINs |
|
USB |
Two front-panel and
six back-panel USB 2.0–compliant connectors |
|
Audio |
Three connectors for
line-in, line-out, and microphone; one front-panel connector for
headphones |
|
System board connectors: |
|
Primary IDE drive |
40-pin connector |
|
Serial ATA |
Two 7-pin connectors |
|
Floppy drive |
34-pin connector |
|
Serial |
12-pin connector for
optional second serial port card |
|
Fan |
5-pin connector |
|
PCI 2.2 |
120-pin connector |
|
CD drive audio interface |
4-pin connector |
|
Front audio |
10-pin connector (For
the optional audio customer kit) |
|
Front panel |
40-pin connector |
|
Key Combinations |
| <Ctrl><Alt><Del> |
If running Microsoft®
Windows® XP, brings up the Windows Security window. If in
MS-DOS® mode, restarts (reboots) the computer |
| <F2> or
<Ctrl><Alt><Enter> |
starts embedded system
setup (during start-up only) |
| <Ctrl><Alt><b> |
automatically starts
the computer from the network environment specified by the
remote boot environment (PXE) rather than from one of the
devices in the system setup Boot Sequence option (during
start-up only) |
| <F12> or
<Ctrl><Alt><F8> |
displays a boot device
menu that allows the user to enter a device for a single boot
(during start-up only) as well as options to run hard-drive and
system diagnostics |
|
Controls and Lights |
| Power control |
Push button |
| Power light |
Green light—blinking
green in sleep state; solid green for power-on state Amber
light—blinking amber indicates a problem with an installed
device; solid amber indicates an internal power problem (see
Power Problems) |
| Hard-drive access
light |
Green |
| Link integrity light
(on integrated network adapter) |
Green light for 10-Mb
operation; orange light for 100-Mb operation; yellow light for a
1000-Mb (1-Gb) operation |
| Activity light (on
integrated network adapter) |
Yellow blinking light |
| Diagnostic lights |
Four lights on the
front panel |
| Standby power light |
AUX_PWR on the system
board |
|
Power |
| DC power
supply: |
|
Wattage |
305 W |
|
Heat dissipation |
150W max |
|
Voltage |
Fixed-voltage power
supply—110 V at 50/60 Hz Manual selection and auto-sensing
power supplies—90 to 135 V at 50/60 Hz; 180 to 265 V at
50/60 Hz; 100 V at 50/60 Hz for Japanese computers |
| Backup battery |
3-V CR2032 lithium
coin cell |
|
Physical |
|
Height |
41.4 cm (16.3 inches) |
|
Width |
18.5 cm (7.3 inches) |
|
Depth |
43.9 cm (17.3 inches) |
|
Weight |
12.34 kg (27.2 lbs) |
|
Environmental |
|
Temperature: |
|
Operating |
10° to 35°C (50° to
95°F) NOTE: At 35°C (95°F), the
maximum operating altitude is 914 m (3000 ft). |
|
Storage |
–40° to 65°C (–40° to
149°F) |
| Relative humidity |
20% to 80% (noncondensing) |
| Maximum
vibration: |
|
Operating |
0.25 G at 3 to 200 Hz
at 0.5 octave/min |
|
Storage |
0.5 G at 3 to 200 Hz
at 1 octave/min |
| Maximum
shock: |
|
Operating |
Bottom half-sine pulse
with a change in velocity of 20 inches/sec (50.8 cm/sec) |
|
Storage |
27-G faired square
wave with a velocity change of 200 inches/sec (508 cm/sec) |
| Altitude: |
|
Operating |
–15.2 to 3048 m (–50
to 10,000 ft) |
|
Storage |
–15.2 to 10,668 m (–50
to 35,000 ft) |
|
|
Copyright 2022 Rhuss. All Rights Reserved. |
|